Here at All-Spec Industries, we carry a few UV magnifiers, microscopes, and video inspection systems, but you may wonder why you would need them for PCB inspection. While normal magnifiers and microscopes can help find issues with soldering or physical damage, UV lights are often used to check PCB’s conformal coating.
A conformal coating protects PCB’s from moisture, dust, and other environmental damage by providing a chemical barrier on the board. Many conformal coatings contain a UV trace, which will glow when viewed under a UV light. Because of this, UV magnifiers and microscopes can be used to find gaps in the conformal coating, and experienced inspectors can even validate the thickness of the coating based on the intensity of the glow.
Do you have any questions on how our products work or what you should use them for? Leave a comment below and we will get you an answer!
The Techspray 1671-10S is an ultra pure non-flammable aerosol duster. This duster has a zero ozone-depleting factor. The 10oz aerosol sends out powerful clean bursts of air that dislodge and remove microscopic contaminates including lint, dust, and other soils.
- Non-ozone depleting
- Moisture free inert gas
- Made with HFC-134a
- RoHS compliant
While supplies last when you purchase a minimum of 2 cases (24 cans) get this duster for $5.00 per can!
For more information on the Techspray 1671-10S aerosol duster promotion, go to
www.All-Spec.com or call customer service at (800) 537-0351 to order today.
This is final post in our three part “Types of Swab Tips” blog series. Today we are going to talk about Microfiber and Polyvinyl Swabs.
These tips are welded to the shaft using an ultrasonic method free of adhesives. This ensures a clean tip that is low in particulates, as well as soft and non-abrasive. Microfiber swabs also have superior wipe dry characteristics.
Polyvinyl tips are very precise, allowing for pinpoint accuracy for application. The tip is also porous, allowing for picking up liquids at small targeted locations.
Have any questions on our swabs? Call Customer Service at (800) 537-0351 or visit our website at www.All-Spec.com today!
Have you heard of our Metro ESD Upgrade Promotion? Until the end of December 2012 we are providing a free ESD-safe upgrade with the purchase of each eligible Metro shelving kit. Now is the perfect time to order shelving to store your static sensitive products.
For any stationary Metro shelves you order you will receive a special conductive sleeve that ensures connectivity between the shelves and the posts. This allows you to easily ground your Metro shelving unit through the posts, either by positioning your shelves on ESD-safe flooring or by using a ground cord.
When ordering mobile Metro shelves you will not only receive the conductive sleeves, but you also will get a clamp-on ground cable. This ground cable will let your mobile shelves maintain connection to your ESD-safe flooring, keeping your shelving unit static safe.
Visit www.All-Spec.com or call customer service at (800) 537-0351 today to order your new Metro shelving unit and receive your free ESD-safe upgrade!
Created for sensitive environments, cleanroom disposable lab coats offer protection for both your workers and your project area. All-Spec Industries now carries Tyvek®, MicroPorous, Polypropylene, Advantage Pro, and Advantage Plus lab coats from small to 5X-large. All of our lab coats conform to Federal Standard 209D: Class 1000 and ISO Standard: ISO 6. We also offer ESD-safe cleanroom disposable lab coats in most sizes and materials.
- Non-woven material to increase durability and reduce contaminants
- Made of 100% high density polyethylene fiber
- Anti-static version available
- Coated with a lint free film to reduce particulates
- Made of 100% spun bonded polypropylene substrate laminated to 100% microporous polyethylene film
- All of our microporous disposable lab coats are anti-static
- Made of 100% spun bound filament
- Available in white, yellow, or blue
- Not ESD-safe
- 3-layer lightweight spun bonded material
- Provides barrier against light chemical splashes and water based liquids
- ESD-safe version is treated with anti-static agent
- Alternative to Tyvek®, made from polypropylene coated with a layer of polyethylene
- Reduced particle release
- Protects against water based liquids and certain chemicals
- Not ESD-safe
Want more information on our cleanroom disposable lab coats? Call Customer Service at (800)-537-0351 or visit our website at www.All-Spec.com today!