cleaner

Branson’s new digital CPX series of ultrasonic baths with self-adaptive technology gives you industry-leading cleaning quality, plus so much more. With digital controls and power tracking capabilities, the digital CPX series makes consistent, precise 40 kHz cleaning programmable and easy to use for any technician.

Features

  • Automatic adjustments for light or heavy loads: Each model actively tracks the bath’s operating frequency and immediately brings the tank’s frequency back to its optimum point. You get unwavering cavitation and steady activity in the bath — even when the load conditions change.
  • High/low power control: You have the choice of 100% amplitude of the acoustic energy for normal applications, or 70% amplitude for delicate applications to avoid damage.
  • Up to 99 minute degassing period: For extra cleaning applications like sample preparation, mixing and homogenization, dissolving solids, cell lysing, and particle dispersion.
  • Energy-saving sleep mode: Automatically activates 15 minutes after cycle is complete.
  • New easily accessible control tower: located above and behind the cleaning tank to avoid damage from cleaning solutions.

Have any more questions on the Branson digital CPX cleaners? Leave a comment below, or call Customer Service at (800) 537-0351 today!

{ 2 comments }

Anyone who has ever had to clean up dust or toner from any type of electronic or computer equipment is probably familiar with the 3M Electronics Vacuum – long the preferred choice for field service professionals. Now in stock and available from All-Spec, the unit’s backed by a powerful, efficient one HP six amp motor.

You can choose from two types of filters based on application. Both are encased in plastic for durability and easy disposal – when full just remove and throw away with no spillage. The type 1 filter is constructed from a HEPA material to trap fine particles to 0.3 microns, and is recommended for working with color laser printers, copiers, and around sensitive equipment.  The type 2 filter is designed for trapping unwanted toner from copiers and laser printers, and is also ideal for cleaning data processing equipment.

Features:

  • Power cord detaches to make storage easy
  • Motor housing is specially designed to make motor change out easy if servicing is needed
  • Conductive housing and attachments quickly dissipate static charges
  • Weighs less than 9 pounds
  • Includes a crevice nozzle, crevice brush, curved wand nozzle, needle nose nozzle and dusting brush

Have any more questions on the 3m 497AJM ESD-safe Vacuum Cleaner? Leave a comment below, or call Customer Service at (800) 537-0351 today!

{ 0 comments }

Types of Cleaners: Aerosol Sprays

by Andy on April 1, 2013

Techspray 1671-10S Aerosol DusterToday and next Monday we will be highlighting some of our cleaning chemicals at All-Spec.com, as well as their common uses. This week we are focusing on aerosol sprays, and next we will go into general liquid cleaning chemicals.

Aerosol Dusters

Widely used in both production facilities and homes, aerosol dusters are used for removing large particles from products. The main difference between various dusters is the strength of the spray and the purity of the air.

Typically the strength of the spray is determined by the size of the nozzle opening. If you want more pressure then go for a smaller opening, but if you need to cover a large area then you will want a larger opening.

For some sensitive parts the purity of the air may be a concern. For instance, the Techspray 1671-10 Ultra Pure duster uses a moisture free inert gas to remove particles without any harmful solvents. As always, contact the manufacturer of the aerosol if you have specific questions as to which type of duster is correct for your application.

Contact Cleaners

Contact cleaners are very similar to aerosol dusters, but they include a cleaning agent that typically evaporates after use. When comparing contact cleaners you should look at compatible materials and whether or not they leave a residue.

In general, contact cleaners are used to remove oxidation, corrosion, dirt, and grease on metal surfaces. If you are working with other materials like plastics then you should check your cleaner’s specifications to ensure that it will not harm your product. If your components are especially sensitive, or if you need to have a clear surface after cleaning, then be sure to use a contact cleaner that does not leave a residue behind.

Flux Removers

Flux removers are used exactly how you would think, to remove fluxes from products after soldering. The main thing to look for in flux removers is what flux it can actually remove. Because there are many types of fluxes, each with different residues that are left behind, you need to check the flux remover’s compatibility with your project.

Have any questions on aerosol cleaners? Leave a comment below or call Customer Service at (800) 537-0351 today!

{ 0 comments }