esd environment Archives | All-Spec's Official Blog

Latex Gloves – Are You Allergic?


Many industrial manufacturing environments require workers to wear protective gloves, including during electronics and medical device production and assembly. Latex gloves not only protect workers from harmful chemicals but also protect products from worker contact and contamination during manufacturing Read more

ST 925 SMT Rework System–Three favorites combined into one nice savings


Save a few steps--and some money--with the Pace 925 SMT Rework System Pace has introduced a new low-cost “combination” system ideal for surface mount technology (SMT) rework. It’s worth adding up the savings by comparing the a la carte prices Read more

Metcal’s CV-5200 Connection Validation Soldering Station Changes Everything


You may or may not have heard about Metcal’s new soldering station, the CV-5200. The evolutionary tool removes much of the reliance on visual inspection of hand-soldered joints and adds a second, more technology-driven method for validating a successful Read more

ESD–Smaller Parts, Bigger Problems

Posted on by Andy in ESD News, Static Control Tips and Tricks, Technical Articles Leave a comment

ESD Sparks Conversation

It’s no shock that smaller electronic parts have been causing bigger ESD (electrostatic dissipation) problems–serious problems that cause component damage and money. How much damage depends on the sensitivity or susceptibility of the device.

Thankfully you can put controls in place to significantly reduce ESD incidents. Preplanning, understanding causes and solutions, and wearing special fabrics and components will help.

Preplanning

  1. Design products and assemblies to be as protected as practical from ESD damage
  2. Decide how much of the environment needs to be controlled
  3. Identify the areas needing protection and ESD sensitive parts
  4. Define the electrostatic protected areas (EPAs)
  5. Define the areas where ESD sensitive parts (ESDs) will be handled
  6. Eliminate static generating processes to reduce electrostatic charge generation; keep processes and materials at the same electrostatic potential; provide appropriate ground paths to minimize charge generation and accumulation
  7. Use grounding, ionization, and conductive and dissipative static control materials to dissipate and neutralize
  8. Use grounding, ionization, and conductive and dissipative static control materials to dissipate and neutralize
  9. Protect products from ESD with proper grounding or shunting, static control packaging and material handling products

Areas needing ESD protection

Causes and effective solutions

ESD is a tiny version of lightning. As the current dissipates through an object, it’s seeking a low impedance path to ground to equalize potentials. In most cases, ESD currents will travel to ground via the metal chassis frame of a device. However, it’s well known that current will travel on every available path.

Table showing esd causes and solutions

Control the area

The first step is to ground all components of the workstation and the personnel (work surfaces, equipment, etc.) to the same electrical ground point, called the “common point ground” i.e., system or method for connecting two or more grounding conductors to the same electrical potential.

All-Spec carries all of the products listed below to help you control your environment and keep it safe from ESD.

ESD control materials