torque tester

Product Spotlight: ASG Torque Drivers

by Andy on December 19, 2012

ASG Torque DriversASG makes a wide variety of torque drivers, suited for use on many different products. By allowing you to choose between lever and push to start drivers with brushed or brushless motors, you can get the exact type of driver that your production team needs. We also carry ASG tool balancers and positioners, which provide an ergonomic storage solution. Lastly, we have a number of torque testers, so you can ensure your drivers are maintaining their torque setting.


  • Models available with torque ranges as low as 2.72 ozf/in up to 40 lbf/in
  • Various weights, widths, and lengths available to fit any workstation
  • ¼” and 4mm hex drive sizes
  • Manual setting or factory pre-set torque


We are still running a promotion on select ASG torque drivers until December 31st, 2012! Purchase a qualifying ASG torque driver and receive a free PS-55 power supply. Call Customer Service at (800) 537-0351, or visit our website at for more information.


(special thanks to Mike Billings at Lindstrom for guest blogging the content below!)

Most torque testers are expensive and complicated or cheap with limited utility. It doesn’t have to be that way. Lindstrom now offers one that is affordable, accurate and easy to use over a wide range of torque devices and torque settings.

When ALL-SPEC customers hear Lindstrom mentioned, they probably think of our “little yellow cutter” or the pioneering ergonomic design of our RX Series ERGO cutters and pliers. But one of our most popular tool lines is our torque screwdriver range, both micro-adjustable and preset. People love the elegant yet tough tools for their consistently good results.

DTT Lindstrom Torque Tester For years, customers have asked us if we make a tester for use with torque devices, one as good as our screwdrivers. Back then, all we made were hand tools. Now, we make what just may be the best little Digital Torque Tester™ available: DTT-501-EZ.

Like our torque screwdrivers, DTT will be prized for its accuracy and repeatability. They share the same rugged design and tough powdercoat finish and both were created by the Snap-on Industrial Brand engineers who design torque wrenches and professional calibration systems for our company. So, we were able to pack a ton of features into these affordable torque testers. With a range of 20 to 800 inch ounces, the DTT can execute a quick peak-value check on torque devices – wrenches, screwdrivers, T-handles and even electric-drive on low RPM – to verify values – or perform a three-stage calibration sequence that adheres to A.S.M.E. standards. Visual and audio cues show users as torque values change during testing. Test data can be instantly downloaded to any text or spreadsheet program.

DTT Torque Tester in Case As implied in its name, DTT-501-EZ is easy to use. The touch screen has an intuitive design that makes it simple to navigate from opening screen to the type of test desired. Typical torque units (, Nm, kgcm, etc.) are supported in both SAE and International Standard. Lindstrom preprogrammed the DTT to automatically step through settings of 20%, 60% and 100% to test adjustable torque devices in conformance with A.S.M.E. B107-28-2005. Calibrations are traceable to N.I.S.T. standards and Lindstrom DTT-501-EZ is accurate to +/- 0.5% within specified range.

The Lindstrom Digital Torque TesterTM is an affordable and versatile torque testing machine that can be mounted on a wall, bench-top or mobile test cart. All DTT are sold as a complete kit including AC/DC power supply, USB cable, hex adapter, six-cell battery pack and carrying case.

All-Spec Industries is now carrying the Lindstrom DTT-501-EZ!

All-Spec Industries is an authorized distributor of Lindstrom tools. Lindstrom is one of the oldest continuous producers of hand tools still around today; they’ve been producing precision pliers and cutters since 1856.